| Product Type | Description | RRP |
|---|---|---|
| Pondshield Starter – 5 litre | Pondshield Starter – 5 litre, total coverage 5 square metres using 2 coats minimum | $169.95 |
| Pondshield Starter – 15 litre | Pondshield Starter – 15 litre, total coverage 15 square metres using 2 coats minimum | $389.95 |
| Pondshield Pro – 4 litre | Pondshield Pro – 4 litre, (2×2 litre parts) total coverage 6 sq metres using 2 coats recommended |
$269.95 |
| Pondshield Pro – 20 litre | Pondshield Pro – 20 litre, (10×10 litre parts) total coverage 30 sq metres using 2 coats recommended |
$1099.95 |
| Gold Label Underwater Sealer – 290ml Black | Gold Label Underwater Sealer – 290ml Black | $49.95 |
| Gold Label Underwater Sealer – 290ml Clear | Gold Label Underwater Sealer – 290ml Clear | $49.95 |
The magic is that Gold Labe Underwater Sealer will seal & bond even underwater! Make repairs to your gutters and roofs or fix leaks in your chlorinated swimming pool, marine or freshwater aquarium & your garden pond; without having to remove the fish or plants and not needing to drain them either. You can even use it to stick coral onto living rock.
It is non-toxic to fish & aquatic plants, inert, solvent & isocyanate-free, cures underwater and has 4 times the bond strength of silicon.
For best results clean all surfaces, to be free of Grease, algae.
Place sealer directly onto the surface you wish to bond/seal.
For bonding where there is movement (expansion & Contraction) of different substrates, leave a minimum 2mm thickness of bead between surfaces. Where there is livestock near the sealer, protect from ingestion While curing. Full cure 24 hours. Initial tack 2-3 hours. Can be painted over up to 4 hours.
For Clear Gold Sealer, leave a minimum 5mm bead between surfaces. ( MS Modified Polymer) For joining liner, use two beads 150mm apart and leave to cure for 36 hours at ambient temperature and for a patch, run a continuous bead around the edge of the patch and gently press into place. DO NOT PRESS FLAT.
Use a 5mm bead for optimum cure and bond strength. Initial cure 24 hours, continuing to harden up to 7 days. For use on concrete, first use a suitable primer.
Q – Will it cure underwater?
A – Yes, as it uses the oxygen in the water to cure
Q – Can I use Gold Label in marine tanks?
A – Yes, there is no difference in performance between fresh water and saltwater
Q – Can I use Gold Label to stick living rock or coral?
A – Yes, because Gold Label is an inert, non-toxic product it can be used safely on coral or living rock
